- ICL improved curtain pick
- Chris Belcher reverse pocket curtain pick
- Chris Belcher Chubb 110 pick
- Chris Belcher pre-lifter pick
ICL improved curtain pick
Improved version New two-part handles shown below eliminate any slip of the wire in the handle. Unlike thumb wheel versions which rely on grub screws to grip the wire, this handle design will give enormous strength and will prevent any slippage.
New wires have been designed to pick under the lowest levers in mortice locks. Unlike other designs that use a small picking wire glued or braised into a larger shaft, our wires give total flexibility. Try our pick in a BS lock with low levers and compare it to the thicker wires of others.
Do not be fooled by what seem to be cheaper copies of this pick. This is the original and improved version of the ICL pick as used by trading locksmiths to pick BS mortice locks.
This high quality pick has a number of unique features:
- Two bodies come as standard – a 5/5.5-gauge and a 7-gauge body, both machined to a high quality from marine grade steel to resist any rusting
- Very strong left and right wires, both machined and hardened from a single piece of steel (so there will be no failure at the pick end, unlike other curtain picks)
- No set up time to switch hands – each wire has its own aluminium fully adjustable handle that can be stored flat without disassembly
- Flat handles give a picking advantage over thumb wheel versions, making it very easy to pick locks such as the ERA Profit and Invincible because the user can read the angle of the flat handle and so tell what the levers are inside the lock, which cannot be done easily with other picks.
- An easy slide tension bar that doesn't need a tool to adjust its position
- A free-moving mechanism with no restrictive collar to assist the picking of low levers
- Complete with robust box with pre-cut foam insert for easy and secure storage; the box is embossed with the ICL logo
ICL Curtain pick
£140 + VAT
Reverse Pocket curtain pick
Developed by Chris Belcher and designed to open British Standard Mortice Locks, these tools are renowned for being amongst the best in the world.
Each set contains a 5g and 7g curtain pick, three double ended wires and a thumb turn, all presented in a stylish display box.
Important!
These tools will be sold only to trading locksmiths. Proof of trading will be required before an order will be accepted by Walker Locksmiths.
Belcher reverse pocket pick
£149.95 + VAT
Chris Belcher Chubb 110 pick
This tool is designed to allow manual picking of the Chubb Detainer locks, such as the 3R35, 3K70, 3J60, and the 110. It allows the operator to have far more control over the picking procedure for these types of locks.
This is a useful addition to any locksmith's tool kit. The tool is extremely robust and allows for the picking of left- and right-hand mounted locks using the now well-known CB reversible picking wire.
Previously the picking of detainer locks has been somewhat hit and miss. Once mastered with this tool, however, opening times could surprise you.
The tool comes in a nice quality wooden presentation boxed case.
Important!
These tools will be sold only to trading locksmiths. Proof of trading will be required before an order will be accepted by Walker Locksmiths.
Belcher Chubb 110 pick
£149.95 + VAT
Chris Belcher pre-lifter pick
The original E Pick version of the RPCP range has evolved, and has now been specifically manufactured with the modification to defeat the ERA Fortress, the Chubb 114E, etc. This tool can also be used on the Chubb 114 older versions of locks.
The RPCP Pre-Lifter is designed to lift all levers fractionally to allow ease of passage for the picking wire. The tool has its own unique picking wire, and only light tension is required when picking. This tool comes in a wooden presentation box case.
Important!
These tools will be sold only to trading locksmiths. Proof of trading will be required before an order will be accepted by Walker Locksmiths.
Belcher pre-lifter pick
£149.95 + VAT